Paul Components Circles Silver Crankset

Paul Components Circles Crankset is 100% Pure Crank from Paul Component Engineering. Strong, elegant & classy.

Paul Components Road Cranks take advantage of the narrower chainstays found on road frames, and the 44mm chainline of Paul Components High Flange hubs.

These cranks use a specially designed interlocking chain ring/crank interface. Four 7075 Aluminum chain ring bolts with T25 Torx heads bolt through the chain ring and into the reinforced spider on the crank arm.

The crank arms are machined from 2024 aluminum, a very strong and stiff material. They are given a high polish finish and optional black anodize. The crank arms are available in 165mm.

The chain rings are machined out of 6.3mm thick aluminum plate; very sturdy. Wider teeth designed only to work with ¹⁄₈” chains which prolongs their life span. 

Specification:
• 2024 Aluminium crank arms
• 6061 Aluminium chain ring
• Compatible with Paul Components Chainrings Only

Cranks
Crank Size: 165mm with 46t or 165mm with 48t

Bottom Bracket
Bottom Bracket Size (Required/Not Included): - 111mm Square Taper ISO
Chainline: Standard 44mm Chainline



Chainring
Chainring Size (Select via Menus): 47t to 52t
Chainring BCD: 144BCD
Chainring Gauge (Required Chain Size): 1/8th 

Installation

You will require the following tools to install this product on your frame

• 8mm Allen Key/Hex Tool Velodrome Shop Large Allen Key

• 15mm Crank Wrench Velodrome Shop Track Cycling Spanner

• Crank Puller for Square Taper Cranks Velodrome Shop Square Taper Crank Extractor

• 15mm Metric Wrench Velodrome Shop Track Cycling Spanner

• Anti-Seize Compound - Weldtite TF2 Lithium Grease

• Lubricant - Weldtite TF2 Teflon Grease

•Torque Wrench with Bit Set (Including the Required 8mm Bit) - Velodrome Shop Torque Wrench

Here is a video from the Global Cycling Network showing the process of installing a Square Taper Bottom Bracket and Chainset on a Track Frame, please note the video shows a Campagnolo Chainset as an example however the process is the same for all Square Taper Bottom Brackets and Chainsets. The video also shows a “dry-fit” with no grease or lubrication, you would obviously need to grease and lubricate all parts.

The following video is an excellent video from Park Tools showing the process of installing a Square Taper, ISIS and Octalink Bottom Brackets and Chainsets on a Road Frame. The processes shown are identical to those used on a Track Frame so the video is a very useful guide. Park Tools are listed here on our website https://www.velodrome.shop/park-tools/

Product Weight: 556g