BLB Black Track Crankset

You will require the following tools to install this product on your frame

• 8mm Allen Key/Hex Tool Large Allen Key

• 15mm Crank Wrench Track Cycling Spanner

• Crank Puller for Square Taper Cranks Square Taper Crank Extractor

• Anti-Seize Compound - Weldtite TF2 Lithium Grease or Park Tools ASC-1 - Anti-Seize Compound

• Lubricant - Weldtite TF2 Teflon Grease or Park Tools HPG-1 - High Performance Grease

•Torque Wrench with Bit Set (Including the Required 8mm Bit) - Torque Wrench

Here is a video from the Global Cycling Network showing the process of installing a Square Taper Bottom Bracket and Chainset on a Track Frame, please note the video shows a Campagnolo Chainset as an example however the process is the same for all Square Taper Bottom Brackets and Chainsets. The video also shows a “dry-fit” with no grease or lubrication, you would obviously need to grease and lubricate all parts.

The following video is an excellent video from Park Tools showing the process of installing a Square Taper, ISIS and Octalink Bottom Brackets and Chainsets on a Road Frame. The processes shown are identical to those used on a Track Frame so the video is a very useful guide. Park Tools are listed here on our website https://www.velodrome.shop/park-tools/

Spare/Replacement Parts
The below are spare/replacement parts (not included)
Replacement Chainring Bolts - Track Cycling Chainring Bolts
Compatible Crank Bolts - Square Taper Chainset Bolts